DIY Tote Bag Kit | Customize Your Own Tote with 3 Transfer Sheets

Make something that's completely your own with the 222 Parkside DIY Tote Bag Kit. Create a personalized tote by choosing your favorite designs from three transfer sheets and arranging them however you like. A fun, easygoing craft for a cozy night in, a get-together with friends, or a creative gift.

What's included

• One tote bag
• Three sheets of DTF transfers to arrange as you like
• Parchment paper for covering the designs during pressing

You will need: a household iron and a firm, flat, heat-resistant pressing surface.

Basic household iron instructions

1. Place the tote on a firm, heat-resistant surface. Make sure it is clean, flat, and dry.
2. Turn steam OFF. Preheat your iron to a setting suitable for the tote fabric, and test on a hidden area first.
3. Pre-press the area briefly to remove moisture and wrinkles.
4. Cut out the designs you want and arrange them on the tote with the printed design facing the fabric and the clear carrier facing up.
5. Always cover transfers with the included parchment paper before pressing. Press firmly and steadily without sliding the iron, working in sections to cover each design. Follow any transfer-specific temperature and timing instructions provided with your kit; household irons vary.
6. Allow the transfer to cool completely before peeling. Slowly remove the clear carrier. If any part lifts, replace the carrier, cover with parchment paper, and press again. Let cool and recheck.
7. After peeling, cover the design again with parchment paper and press a second time to help seal the edges. Never touch an uncovered transfer with the iron.
8. Let the completed tote cool before use.

Note: Household irons vary in temperature and pressure. Do not use steam, and never press directly on the transfer without parchment paper. Use caution around hot equipment; adult supervision is recommended.

Made for slowing down, getting creative, and enjoying a little free time.